Chapter 5. Listing of Installed Components

Chapter 5. Listing of Installed Components
Prev	Part I. Installation and Configuration Instructions	Next

The NVIDIA Accelerated Linux Graphics Driver consists of the following components (filenames in parentheses are the full names of the components after installation). Some paths may be different on different systems (e.g., X modules may be installed in /usr/X11R6/ rather than /usr/lib/xorg/).

An X driver (/usr/lib/xorg/modules/drivers/nvidia_drv.so); this driver is needed by the X server to use your NVIDIA hardware.
A GLX extension module for X (/usr/lib/xorg/modules/extensions/libglx.so.375.26); this module is used by the X server to provide server-side GLX support.
An X module for wrapped software rendering (/usr/lib/xorg/modules/libnvidia-wfb.so.375.26 and optionally, /usr/lib/xorg/modules/libwfb.so); this module is used by the X driver to perform software rendering on GeForce 8 series GPUs. If libwfb.so already exists, nvidia-installer will not overwrite it. Otherwise, it will create a symbolic link from libwfb.so to libnvidia-wfb.so.375.26.
EGL and OpenGL ES libraries ( /usr/lib/libEGL.so.1, /usr/lib/libGLESv1_CM.so.375.26, and /usr/lib/libGLESv2.so.375.26 ); these libraries provide the API entry points for all OpenGL ES and EGL function calls. They are loaded at run-time by applications.
Vendor neutral graphics libraries provided by libglvnd (/usr/lib/libOpenGL.so.0, /usr/lib/libGLX.so.0, and /usr/lib/libGLdispatch.so.0); these libraries are currently used to provide full OpenGL dispatching support to NVIDIA's implementation of EGL.

Source code for libglvnd is available at https://github.com/NVIDIA/libglvnd
GLVND vendor implementation libraries for GLX (/usr/lib/libGLX_nvidia.so.0) and EGL (/usr/lib/libEGL_nvidia.so.0); these libraries provide NVIDIA implementations of OpenGL functionality which may be accessed using the GLVND client-facing libraries.
A GLX client library and Vulkan ICD (/usr/lib/libGL.so.1), either as part of the GLVND infrastructure, or a legacy, non-GLVND GLX client library. This library provides API entry points for all GLX function calls, and is loaded at run-time by applications. Users may choose one or the other at installation time by using either the --glvnd-glx-client or the --no-glvnd-glx-client command line option to nvidia-installer.

Note that although both the GLVND and non-GLVND GLX client libraries share the same SONAME of libGL.so.1, only one of them at a time may be installed at a time. /usr/lib/libGL.so.375.26 is the non-GLVND GLX client library, and /usr/lib/libGL.so.1.0.0 is the GLVND GLX client library.

This library is also used as the Vulkan ICD. Its configuration file is installed as /etc/vulkan/icd.d/nvidia_icd.json.

Repackagers of the driver are encouraged to provide the GLVND-based driver stack to promote adoption of the new infrastructure, but those who choose to package the legacy GLX client library instead of, or as an alternative to, the GLVND GLX client library should be aware that the NVIDIA EGL driver depends upon GLVND for proper functionality. The legacy GLX client library may coexist with most GLVND libraries, with the exception of libGL.so.1 and libGLX.so.0, so it is possible to support both NVIDIA EGL and legacy, non-GLVND NVIDIA GLX by installing all of the GLVND libraries except for libGL and libGLX alongside the legacy libGL.
Various libraries that are used internally by other driver components. These include /usr/lib/libnvidia-cfg.so.375.26, /usr/lib/libnvidia-compiler.so.375.26, /usr/lib/libnvidia-eglcore.so.375.26, /usr/lib/libnvidia-glcore.so.375.26, and /usr/lib/libnvidia-glsi.so.375.26.
A VDPAU (Video Decode and Presentation API for Unix-like systems) library for the NVIDIA vendor implementation, (/usr/lib/vdpau/libvdpau_nvidia.so.375.26); see Appendix G, VDPAU Support for details.
The CUDA library (/usr/lib/libcuda.so.375.26) which provides runtime support for CUDA (high-performance computing on the GPU) applications.
The Fatbinary Loader library (/usr/lib/libnvidia-fatbinaryloader.so.375.26) provides support for the CUDA driver to work with CUDA fatbinaries. Fatbinary is a container format which can package multiple PTX and Cubin files compiled for different SM architectures.
The PTX JIT Compiler library (/usr/lib/libnvidia-ptxjitcompiler.so.375.26) is a JIT compiler which compiles PTX into GPU machine code and is used by the CUDA driver.
Two OpenCL libraries (/usr/lib/libOpenCL.so.1.0.0, /usr/lib/libnvidia-opencl.so.375.26); the former is a vendor-independent Installable Client Driver (ICD) loader, and the latter is the NVIDIA Vendor ICD. A config file /etc/OpenCL/vendors/nvidia.icd is also installed, to advertise the NVIDIA Vendor ICD to the ICD Loader.
The nvidia-cuda-mps-control and nvidia-cuda-mps-server applications, which allow MPI processes to run concurrently on a single GPU.
A kernel module (/lib/modules/`uname -r`/kernel/drivers/video/nvidia-modeset.ko); this kernel module is responsible for programming the display engine of the GPU. User-mode NVIDIA driver components such as the NVIDIA X driver, OpenGL driver, and VDPAU driver communicate with nvidia-modeset.ko through the /dev/nvidia-modeset device file.
A kernel module (/lib/modules/`uname -r`/kernel/drivers/video/nvidia.ko); this kernel module provides low-level access to your NVIDIA hardware for all of the above components. It is generally loaded into the kernel when the X server is started, and is used by the X driver and OpenGL. nvidia.ko consists of two pieces: the binary-only core, and a kernel interface that must be compiled specifically for your kernel version. Note that the Linux kernel does not have a consistent binary interface like the X server, so it is important that this kernel interface be matched with the version of the kernel that you are using. This can either be accomplished by compiling yourself, or using precompiled binaries provided for the kernels shipped with some of the more common Linux distributions.
NVIDIA Unified Memory kernel module (/lib/modules/`uname -r`/kernel/drivers/video/nvidia-uvm.ko); this kernel module provides functionality for sharing memory between the CPU and GPU in CUDA programs. It is generally loaded into the kernel when a CUDA program is started, and is used by the CUDA driver on supported platforms.
The nvidia-tls libraries (/usr/lib/libnvidia-tls.so.375.26 and /usr/lib/tls/libnvidia-tls.so.375.26); these files provide thread local storage support for the NVIDIA OpenGL libraries (libGL, libnvidia-glcore, and libglx). Each nvidia-tls library provides support for a particular thread local storage model (such as ELF TLS), and the one appropriate for your system will be loaded at run time.
The nvidia-ml library (/usr/lib/libnvidia-ml.so.375.26); The NVIDIA Management Library provides a monitoring and management API. See Chapter 25, The NVIDIA Management Library for more information.
The application nvidia-installer (/usr/bin/nvidia-installer) is NVIDIA's tool for installing and updating NVIDIA drivers. See Chapter 4, Installing the NVIDIA Driver for a more thorough description.

Source code is available at ftp://download.nvidia.com/XFree86/nvidia-installer/.
The application nvidia-modprobe (/usr/bin/nvidia-modprobe) is installed as setuid root and is used to load the NVIDIA kernel module and create the /dev/nvidia* device nodes by processes (such as CUDA applications) that don't run with sufficient privileges to do those things themselves.

Source code is available at ftp://download.nvidia.com/XFree86/nvidia-modprobe/.
The application nvidia-xconfig (/usr/bin/nvidia-xconfig) is NVIDIA's tool for manipulating X server configuration files. See Chapter 6, Configuring X for the NVIDIA Driver for more information.

Source code is available at ftp://download.nvidia.com/XFree86/nvidia-xconfig/.
The application nvidia-settings (/usr/bin/nvidia-settings) is NVIDIA's tool for dynamic configuration while the X server is running. See Chapter 23, Using the nvidia-settings Utility for more information.
The libnvidia-gtk libraries (/usr/lib/libnvidia-gtk2.so.375.26 and on some platforms /usr/lib/libnvidia-gtk3.so.375.26); these libraries are required to provide the nvidia-settings user interface.

Source code is available at ftp://download.nvidia.com/XFree86/nvidia-settings/.
The application nvidia-smi (/usr/bin/nvidia-smi) is the NVIDIA System Management Interface for management and monitoring functionality. See Chapter 24, Using the nvidia-smi Utility for more information.
The application nvidia-debugdump (/usr/bin/nvidia-debugdump) is NVIDIA's tool for collecting internal GPU state. It is normally invoked by the nvidia-bug-report.sh (/usr/bin/nvidia-bug-report.sh) script. See Chapter 26, Using the nvidia-debugdump Utility for more information.
The daemon nvidia-persistenced (/usr/bin/nvidia-persistenced) is the NVIDIA Persistence Daemon for allowing the NVIDIA kernel module to maintain persistent state when no other NVIDIA driver components are running. See Chapter 27, Using the nvidia-persistenced Utility for more information.

Source code is available at ftp://download.nvidia.com/XFree86/nvidia-persistenced/.
The NVCUVID library (/usr/lib/libnvcuvid.so.375.26); The NVIDIA CUDA Video Decoder (NVCUVID) library provides an interface to hardware video decoding capabilities on NVIDIA GPUs with CUDA.
The NvEncodeAPI library (/usr/lib/libnvidia-encode.so.375.26); The NVENC Video Encoding library provides an interface to video encoder hardware on supported NVIDIA GPUs.
The NvIFROpenGL library (/usr/lib/libnvidia-ifr.so.375.26); The NVIDIA OpenGL-based Inband Frame Readback library provides an interface to capture and optionally encode an OpenGL framebuffer. NvIFROpenGL is a private API that is only available to approved partners for use in remote graphics scenarios. Please contact NVIDIA at GRIDteam@nvidia.com for more information.
The NvFBC library (/usr/lib/libnvidia-fbc.so.375.26); The NVIDIA Framebuffer Capture library provides an interface to capture and optionally encode the framebuffer of an X server screen. NvFBC is a private API that is only available to approved partners for use in remote graphics scenarios. Please contact NVIDIA at GRIDteam@nvidia.com for more information.
An X driver configuration file (/usr/share/X11/xorg.conf.d/nvidia-drm-outputclass.conf); If the X server is sufficiently new, this file will be installed to configure the X server to load the nvidia_drv.so driver automatically if it is started after the NVIDIA DRM kernel module (nvidia-drm.ko) is loaded. This feature is supported in X.Org xserver 1.16 and higher when running on Linux kernel 3.13 or higher with CONFIG_DRM enabled.
Predefined application profile keys and documentation for those keys can be found in the following files in the directory /usr/share/nvidia/: nvidia-application-profiles-375.26-rc, nvidia-application-profiles-375.26-key-documentation.

See Appendix J, Application Profiles for more information.

Problems will arise if applications use the wrong version of a library. This can be the case if there are either old libGL libraries or stale symlinks left lying around. If you think there may be something awry in your installation, check that the following files are in place (these are all the files of the NVIDIA Accelerated Linux Graphics Driver, as well as their symlinks):

    /usr/lib/xorg/modules/drivers/nvidia_drv.so
    /usr/lib/xorg/modules/libwfb.so (if your X server is new enough), or
    /usr/lib/xorg/modules/libnvidia-wfb.so and
    /usr/lib/xorg/modules/libwfb.so -> libnvidia-wfb.so

    /usr/lib/xorg/modules/extensions/libglx.so.375.26
    /usr/lib/xorg/modules/extensions/libglx.so -> libglx.so.375.26

    (the above may also be in /usr/lib/modules or /usr/X11R6/lib/modules)

    /usr/lib/libGL.so.375.26
    /usr/lib/libGL.so.1 -> libGL.so.375.26
    /usr/lib/libGL.so -> libGL.so.1

    (on GLVND-based installations, libGL.so.1 from GLVND may be used instead
    of libGL.so.375.26 as shown above.)

    /usr/lib/libnvidia-glcore.so.375.26

    /usr/lib/libcuda.so.375.26
    /usr/lib/libcuda.so -> libcuda.so.375.26

    /lib/modules/`uname -r`/video/nvidia.{o,ko}, or
    /lib/modules/`uname -r`/kernel/drivers/video/nvidia.{o,ko}

If there are other libraries whose "soname" conflicts with that of the NVIDIA libraries, ldconfig may create the wrong symlinks. It is recommended that you manually remove or rename conflicting libraries (be sure to rename clashing libraries to something that ldconfig will not look at -- we have found that prepending "XXX" to a library name generally does the trick), rerun 'ldconfig', and check that the correct symlinks were made. An example of a library that often creates conflicts is "/usr/lib/mesa/libGL.so*".

If the libraries appear to be correct, then verify that the application is using the correct libraries. For example, to check that the application /usr/bin/glxgears is using the NVIDIA libraries, run:

    % ldd /usr/bin/glxgears
        linux-gate.so.1 =>  (0xffffe000)
        libGL.so.1 => /usr/lib/libGL.so.1 (0xb7ed1000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0xb7ec0000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0xb7de0000)
        libpthread.so.0 => /lib/tls/libpthread.so.0 (0x00946000)
        libm.so.6 => /lib/tls/libm.so.6 (0x0075d000)
        libc.so.6 => /lib/tls/libc.so.6 (0x00631000)
        libnvidia-tls.so.375.26 => /usr/lib/tls/libnvidia-tls.so.375.26 (0xb7ddd000)
        libnvidia-glcore.so.375.26 => /usr/lib/libnvidia-glcore.so.375.26 (0xb5d1f000)
        libdl.so.2 => /lib/libdl.so.2 (0x00782000)
        /lib/ld-linux.so.2 (0x00614000)

In the example above, the list of libraries reported by ldd includes libnvidia-tls.so.375.26 and libnvidia-glcore.so.375.26: this is because glxgears links libGL.so.1, which in this case is the legacy, non-GLVND NVIDIA GLX client library. When libGL.so.1 is provided by GLVND instead, libGLX.so.0 and libGLdispatch.so.0 should appear in the output of ldd. If the GLX client library is something other than the NVIDIA or GLVND libGL.so.1, then you will need to either remove the library that is getting in the way or adjust your dynamic loader search path using the LD_LIBRARY_PATH environment variable. You may want to consult the man pages for ldconfig and ldd.

Prev	Up	Next
Chapter 4. Installing the NVIDIA Driver	Home	Chapter 6. Configuring X for the NVIDIA Driver